| Description
OPSW-5000N Optical switch is important equipment in optical fiber transmission system, mainly used for backup switching 2 ways or multi-way signal, When one of them is defected, it will automatically switch to backup channel thus guarantee system’s regular and continuous operation. The product use imported high performance devices and built in perfect embedded automatic monitoring system to ensure excellent performance of the whole machine. We have two types of casings for customers to choose.
With optional RF detect function, this function will be working when optical input power≥0dBm. Under AUTO mode, with RF detect function: if the detect value is lower than required, it means no RF signal on this path. RF detect relay will switch to another line to detect. Once RF signal is detected, optical switch will be switched to this path. If no RF signal is detected, optical switch will keep the same; When optical input power <0dBm, the device will turn off the RF detect path automatically. The default RF detect function is set under AUTO status mode.
Feature
1) Automatically switch: it is working at main channel as default, in case of failure of main channel or lower optical power value than configured, it will switch into the backup channel automatically; When the main channel recovers, it will switch back again to the main channel; when the unit is defected or power off, it will keep stable on the current working status thus guarantee the smooth operating of the network.
2) Manually switch: selecting main or backup channels could be realized by pressing the bottoms on the front panel, or by remote network management control function
3) Optional SNMP: Standard RJ45 interface, SNMP system, users can monitor its operating status remotely
4) Adopts JDSU parts as the main components.
5) VFD or LED on the front panel can display the operation status and fault alarming of the whole unit
6) High-quality Power Supply, 90V~265VAC or -48VDC
Block Diagram(2X1 mode)
Technical parameters
|
Item |
Unit |
Technique Parameter |
|
Wavelength |
nm |
1200 – 1600 |
|
Insertion loss |
dB |
≤1.2 |
|
Switching time |
ms |
≤ 7 |
|
Echo loss |
dB |
≥ 55 |
|
Polarization Dependence Loss(PDL) |
dB |
≤ 0.06 |
|
input optical power |
dBm |
-15~+24 |
|
RF detect range |
dBm |
Optical input power ≥ 0dBm |
|
Switching life |
|
≥107 times |
|
Optical connector type |
|
FC/APC or SC/APC |
|
Supply voltage |
V |
AC90V - 265V(50 Hz) /DC-48V |
|
Control mode |
|
Automatically / Manually Control |
|
Network management interface |
|
RJ45, support SNMP |
|
Operating temperature |
℃ |
-45 - +85 |
|
Relative Humidity |
% |
Max 95% No condensation |
|
Dimension |
mm |
483(W)×270(L)×44 (H) |
Products series
|
Model |
Switching Mode |
|
OPSW-5201N |
Input A, Input B, Output C, SNMP optional |
|
OPSW-5102N |
Input A, Output B, Output C, SNMP optional | |
