| Description
Feature
1) Plug and play, integrated auto-detecting, auto-configuration, and auto firmware upgrade, etc.
2) Integrated OAM remote configuration and maintenance function.
3) Support rich QinQ VLAN function and IGMP snooping multicast feature.
4) Integrated line testing compliant with GR-909.
5) Support EPON fiber transceiver, CATV Receiver and RF output diagnostic monitoring, EPON fiber transmitter and RF receiver disable remotely.
6) Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.
7) For small and medium-sized operators, VoIP services are customizable.
Technical parameters
|
Technical items |
Descriptions |
|
Uplink interface |
Single fiber triplexer incorporates symmetric 1.25Gbps upstream / downstream and 45~875MHz CATV downstream analogue signal |
|
Wavelength |
EPON Tx 1310nm, EPON Rx 1490nm, CATV Rx 1550nm |
|
Fiber connector |
SC/APC connector |
|
Downlink of DATA |
4x 10/100Mbps auto adaptive Ethernet interfaces, Full Duplex / Half Duplex, AUTO-MDIX, RJ45 connectors |
|
Downlink of POTS |
2x FXS, RJ11 connectors |
|
Downlink of CATV |
SCTE F type |
|
Indicators |
11 indicators, for status of power supply, PON, LAN, POTS and CATV |
|
DC power supply |
+12V, external AC-DC power adaptor |
|
Power switch |
1, power on and off |
|
Reset button |
1, reset and restore to factory configuration |
|
Power consumption |
≤10W |
|
Operating condition |
Operating temp: -5 - +55°C, operating humidity:10-90% (non-condensed) |
|
Storing condition |
Storing temp: -30 - +60°C, storing humidity:10-90% (non-condensed) |
|
Dimension |
245mm*155mm*35mm(length*width*height) |
|
Net weight |
0.92Kg |
Ethernet Service Functions
1) Full speed non-blocking switching.
2) 1K MAC address table.
3) 64 full range VLAN ID.
4) Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk, etc.
5) Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc.
6) Support auto polarity detection of Ethernet ports (AUTO MDIX).
7) Integrated IEEE802.1p QoS with four level priority queues.
8) Support IPv4 IGMP snooping and IPv6 MLD snooping.
POTS Service Functions
1) Call protocol: SIP (IMS compatible), seamless compatible with all popular call agent.
2) Integrate heartbeat function and support active/standby call agent.
3) Voice coding: ITU-T G.711/G.723.1(5.3K/6.3Kbit/s)/G.729, auto-negotiate with call agent.
4) Echo cancellation exceeding ITU-T G.165/G.168-2002, up to 128ms tail length.
5) Support high/low speed fax/Modem, bypass fax, and T38 fax.
6) Support RFC2833 and redundant RFC2833, difference rings, MD5 authentication, call forward, call waiting, hot-line call, alarm clock, and all kinds of value-added voice service.
7) Multi-party conferencing.
8) Line testing according to GR-909.
9) IP address assignment: dynamic PPPoE/DHCP Client and static IP.
10) Support WEB, CLI, TR069.
11) Integrated OAM, XML, DHCP option 66 & 67 for auto configuration and firmware upgrade.
12) Call loss is less than 0.01%.
CATV Service Functions
1) RF frequency: 45~875MHz.
2) Turn on/off RF output remotely.
3) RF level can be showed on PC Web real time.
Application chart
Ordering information
|
Product model |
EPON |
FE |
POTS |
CATV |
|
ONU2800VT |
√ |
4 |
2 |
√ | |
