| Operation Guidance
Please refer to the above Figure:
1. Unscrew VLP tail cap; put in batteries according to the tail’s label;
2. Remove VLP dust cap;
3. Plug the fiber optical connector into VLP light output port, VLP supports universal adapter with 2.5 mm ferrules, and optional 2.5mm to 1.25mm ferrules;
4. Press the Mode/Power button to toggle between continuous, flashing and power off modes;
5. LED Indicator: green and flashing is mode; green is continue mode; red or red flashing is low battery ;
6. Power off VLP, cover the dust cap.
Technical specification
|
Model |
OP3105A-10 |
OP3105A-50 |
|
Output Power |
10mW |
50mW |
|
Detecting Range |
10km |
16km |
|
Power Supply |
1.5V AA Alkaline Battery ×2 |
|
Battery Life |
1mW≥50h; 10mW≥40h |
|
Weight |
120g (without battery) |
|
Size |
φ15x180mm |
|
Laser Type |
FP-LD; Center Wavelength: 650nm±10nm |
|
Work Mode |
CW or Modulated |
|
Output Connector |
2.5mm universal adapter; optional 1.25mm adapter |
|
Working Tem. |
-10 ~ 45℃ |
|
Storage Tem. |
-40 ~70℃ |
|
Relative Humidity |
0 ~ 95% (Non-condensing) | |
