|
OPA-1550S/P series 1550nm Erbium Doped Fiber Amplifier (Pluggable PS) is a kind of EDFA with dual power supply hot-pluggable. It adopts 980nm or 1480nm high linearity, optical isolation, the DFB, thermoelectric cooling DFB laser produced by JDS-U, Fujitsu, Nortel, Lucent, Fitel and other world-renowned semiconductor companies as the pumping source.
In the interior of the machine is equipped with the output optical power stability circuit and laser thermoelectric cooling device, temperature stability control circuit to ensure optimal machine performance and long-life laser stability. The microprocessor software monitor the lasers’ working state, the VFD screen displays the operating parameters. Once the laser operating parameters deviate from the permissible range set by the software, micro-processing will automatically turn off laser power, red light goes on to warn, digital panel prompts cause of troubles.
Features
(1) High quality: The former-class pump common utilizes 980nm, after-class pump use 1480nm, power is legitimately optimized by software to minimize the NF of the EDFA, could be comparable with the so-called low-power optical amplifier. It can make the system to obtain superior CNR.
(3) Intuitive: The laser is the most expensive machine components, machine equipped with microprocessor monitors the working state of the laser, the panel LCD window displays the operating parameters.
(4) Network type: Select All-piece status monitoring transponder guarantee to meet the national standard and be compatible with the SCTE HMS standard, it enable network management monitoring capabilities.
(5) Pluggable power supply: Dual power supply hot and cold backup on back panel, support hot-pluggable, easy to repair and maintain.
Technical specification
|
|
unit |
Specification |
|
Operating wavelength range |
nm |
1540~1560 |
|
Optical input power |
dBm |
-5~+10 |
|
Nominal optical input power |
dBm |
+3 |
|
Working pump quantity |
|
1~3 |
|
Saturated output power |
dBm |
13~26 |
|
Number of output ports |
port |
1~8 (customer specify) |
|
Noise Figure (NF) |
Db |
4.0~6.8 (+0 dBm input @1550nm) |
|
Optical output power stability |
Db |
＜±0.5 |
|
Polarization Sensitivity |
Db |
＜0.2 |
|
Polarization dependence gain |
Db |
＜0.5 |
|
Polarization mode dispersion |
ps |
＜0.5 |
|
Optical connector (IN/OUT) |
|
SC/APC or FC/APC or customer specify |
|
SNMP network management interface (optional) |
|
RJ45 |
|
Power supply |
VAC |
115~265VAC or -48 VDC |
|
Power consumption |
W |
50 |
|
Working temperature |
℃ |
-5~65 |
|
Storage temperature |
℃ |
-40~80 |
|
Operating relative humidity |
% |
5~95 |
|
size |
‘’ |
19×14.5×1.75 (1U,19’’) |
|
Weight |
Kg |
5.0 |
Product series
|
Model |
1550nm Erbium Doped Fiber Amplifier (Pluggable) |
|
Output power @ 0dBm input |
Noise Figure (dB) |
|
OPA-1550P-13 |
Saturated output power≥13dBm |
4.0 |
|
OPA-1550P-14 |
Saturated output power≥14dBm |
4.1 |
|
OPA-1550P-15 |
Saturated output power≥15dBm |
4.2 |
|
OPA-1550P-16 |
Saturated output power≥16dBm |
4.3 |
|
OPA-1550P-17 |
Saturated output power≥17dBm |
4.5 |
|
OPA-1550P-18 |
Saturated output power≥18dBm |
4.8 |
|
OPA-1550P-19 |
Saturated output power≥19dBm |
5.0 |
|
OPA-1550P-20 |
Saturated output power≥20dBm |
5.3 |
|
OPA-1550P-21 |
Saturated output power≥21dBm |
5.5 |
|
OPA-1550P-22 |
Saturated output power≥22dBm |
5.8 |
|
OPA-1550P-23 |
Saturated output power≥23dBm |
6.0 |
|
OPA-1550P-24 |
Saturated output power≥24dBm |
6.3 |
|
OPA-1550P-25 |
Saturated output power≥25dBm |
6.5 |
|
OPA-1550P-26 |
Saturated output power≥26dBm |
6.8 |
|
